Hollow Wedge Nuts


Type TR60 - Wedge Type VN - Nuts

Type TR60 - Wedge

[ back to index ] [ image ] [ description ]  

TR60 - Wedge

Description

Ideal for the suspension of building services, the TR60 is designed for specific use with the SMD TR60 and TR80 decking profile. With the ability to accommodate threaded rod sized M6, M8 and M10, and a guaranteed Safe Working Load of 1 kN with a Factor of Safety of 3:1.

 

Installation TR60

  • Pre-assemble the wedge and locking plate onto the wedge and threaded rod as shown in Step 1.
  • Insert the wedge into the re-entrant channel of the decking, flat surface uppermost and rotate until the chamfered cams engage on the sides of the channel, the wedge should be firmly in place.
  • Slide the plate up the threaded rod and over the wedge to lock it into position in the channel.
  • Tighten the locknut beneath the plate to hold the assembly in position

 

Type VN - V Nuts

[ back to index ] [ image ] [ description ] [ data ]

Description

The V Nut fits into the slots of 'V' profile composite floor decking, such as HaloRib, and is available with a threaded hole tapped M4, M5, M6, M8 or M10. The VN is suitable for decking with a 15° tapered slot. Factor of safety is 4:1.

installation V Nuts

  • Screw VN onto threaded rod.
  • Insert VN and rod into re-entrant channel of decking.
  • Rotate both rod and V Nut through 90° so that tapered sides engage the sides of the channel

 

Data

Product Code Drop Rod Size Loads (kN) Width    W Length   L Thickness T
VN04 M4 0.86 12.5 25 13
VN05 M5 1.4 12.5 25 13
VN06 M6 1.8 12.5 25 13
VN08 M8 2 12.5 25 13
VN10 M10 2.1 12.5 25 13